Speedline MPM Momentum

SALES STATUS: Pending

Speedline MPM Momentum

IBE SMT Inventory ID : 240729-004
Speedline MPM Serial Number : M202707
Vintage : AUG 2014

Details

Inspection Interface
Paste Height Monitor
Paste Dispenser
200-240 V

Specifications ( See Details above for installed options )

Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput demands grow. There are five different versions of the Momentum available, based on needed cycle time speed, or capacity. Numerous patents protect the Momentum, which incorporates tried and true systems and features from other successful MPM printers that were designed prior to Momentum (and are still in use today). Momentum’s alignment repeatability is +/-12.5 microns @ 6 sigma, Cpk > 2. Its 6 sigma capability is designed in and independently verified. Wet print accuracy is 20 microns @ 6 sigma, Cpk > 2. Tighter performance tolerances mean higher repeatability with fewer defects.

BOARD HANDLING

Maximum Board Size (X x Y):
609.6 mm x 508 mm (24” x 20”)

Staging Mode - Momentum Elite:
457 mm x 508 mm (18” x 20”)

Minimum Board Size (X x Y):
50.8 mm x 50.8 mm (2” x 2”)

Board Thickness:
0.2mm (0.008") to 5.0mm
(0.20”), up to 6.0 mm
(0.24”) without top clamp foils

Maximum Board Weight:
4.5 kg (9.92 lbs)

Board Edge Clearance:
3.0 mm (0.118")

Underside Clearance:
12.7 mm (0.5") standard
Configurable for 25.4 mm (1.0”)

Board Hold-Down Fixed top clamps, centernest vacuum
Optional EdgeLoc

Board Support Methods:
Magnetic pins,Optional Gel-Flex, vacuum pins,
support blocks, patented auto-tooling or Grid-Lok

PRINT PARAMETERS

Maximum Print Area (X x Y):
609.6 mm x 508 mm (24" x 20")

Print Gap (Snap-off):
0 mm to 6.35 mm (0" to 0.25")

Print Speed Up to 305 mm/sec (12.0"/sec)

Print Force 0 to 20 kg (0 lb to 44 lbs)

Stencil Frame Size:
737 mm x 737 mm (29" x 29")

Adapters available for smaller sizes

VISION

Fiducial Types:
Standard shape fiducials(see SMEMA standards),
pad/aperture

Camera System:
Single digital camera - MPM patented look up/down vision

PERFORMANCE

Total System Alignment: ±12.5 microns

Accuracy and Repeatability:
±0.0005") at 6 sigma, Cpk of greater than or equal to 2.0*

Qualification is performed using production environment
process variables; print speed, table lift and camera
movement are included in the capability figure.
Wet Print Deposit ±20 microns

Accuracy and Repeatability (±0.0008") at 6 sigma,
Cpk of greater than or equal to 2.0*

Based upon actual wet printing with positional accuracy
and repeatability verified by a 3rd party measurement
system.

Cycle Time
Momentum 11 seconds standard
Momentum+ 9 seconds standard
Momentum HiE 7.5 seconds standard
Momentum Elite 6 seconds standard

FACILITIES
Power Requirements
200 to 240 VAC (±10%)
single phase @
50/60Hz,
15 A

Air Supply Requirements 100 psi at 4 cfm
(standard run mode) to 18cfm
(vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5L/s),
12.7 mm (0.5”) diameterline

Machine Weight

Momentum, Momentum+ Momentum HiE:
862 kg (1900 lbs)

Momentum Elite:
899 kg (1982 lbs)

Crated Weight

Momentum, Momentum+ & Momentum HiE:
1155.5 kg (2547 lbs)

Momentum Elite:
1192.5 kg (2629 lbs)

Pictures

Click Any Image to View Slideshow

IBE SMT Equipment, LLC
318 Corporate Woods Drive, Magnolia, TX 77354
Toll Free: (800) 353-6942 Phone: (281) 259-9660 Fax: (281) 259-8863

Speedline MPM, Momentum, Screen Printer, mpm, elite, solder, paste, printer, smt, used, stencil, speedline - IBE ID: 240729-004
All Equipment is subject to prior sale - All prices and terms are subject to change without notice. © Copyright 2007. IBE SMT Equipment, LLC All Rights Reserved.

E-Mail:	*	Invalid Email
	* Your E-mail Address will be your username for ibesmt.com
Password:	*	Invalid Password Password is required.
	* Your password must be 8 characters long
Confirm Password:	*	Passwords do not match

Email:
Password:
Remember Me?:


New User? Forgot Password?

E-mail Address:
Old Password:	*	Old Password is required.
New Password:	*	Invalid Password New Password is required.
	* Your password must be 8 characters long
Confirm New Password:	*	Passwords do not match

Full Name:
Company Name:
Phone Number:
Email Address:

Create an IBESMT.com Account

Login:

IBESMT.com Forgot Password:

IBESMT.com User Password Reset:

Speedline MPM Momentum

Get Machine Quick Quote

Pictures